DAPAudio DS-CDJ-250 MKII 제품 설명서 - 페이지 16
{카테고리_이름} DAPAudio DS-CDJ-250 MKII에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio DS-CDJ-250 MKII 20 페이지. Audio mixer
DAPAudio DS-CDJ-250 MKII에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)
페이지 인쇄
2) Pitch-Bending
• The BPM increases or decreases respectively while the PITCH BEND + or PITCH BEND - button is
pressed.
• The BPM increase depends on how long you hold the button. If you hold the button for about 5
seconds, the BPM will go either to +12% for PITCH BEND + or -12% for PITCH BEND -. If you tap the
button, the BPM will only change a little so you can change the beat slightly without audible
changing in the music.
• The CD will return to the BPM indicated by the Pitch slider when you release the PITCH BEND + or
PITCH BEND - buttons.
3) Turn the Shuttle wheel
• Turn the Shuttle wheel clockwise during play to increase the BPM in the forward direction,
counterclockwise to decrease the BPM. The faster you turn the wheel, the more BPM changes.
The BPM changes with a range of+/-12%.
• When you release the Shuttle wheel, the CD will return to the BPM indicated by the pitch slider.
13. Program Play
1. Press the Pgm button, the player will enter the program mode and the CD will stop rotating.
2. Select the desired track by pressing the Skip button, then press the Pgm button again. The
selected track will be added to the program sequence.
3. Repeat step 2. A maximum of 30 tracks can be programmed.
4. Press the Play/Pause button to start the program play from the first selection.
5. Press the Pgm button again during program play to stop playing.
6. Press and hold the button more than 2 seconds to cancel the program mode and erase
all the current program contents.
14. Loop PLAY
1. Press the Loop IN button to set the loop start point, the Loop indicator will flash on the LCD.
2. Press the Loop OUT button to set the loop end point. After the end point is set, the playback will
enter the loop play from start point to end point repeatedly.
3. Press one of the Loop buttons again, the loop play function is canceled, the Loop indicator
dimms.
15. Reloop
1. If you press the Reloop button, the disc will go back to the last selected loop.
2. Press the button over and over rapidly to start the loop again and again.
3. Press one of the Loop buttons again, the loop play function is canceled, the Loop indicator
dimms.
16. Repeat
1. Press the Repeat button once to repeat the current track.
2. Press the Repeat button again to repeat the whole disc.
3. Press the Repeat button a third time, to exit the Repeat Mode.
17. Setting up the Fader Start Relay
1. Cue up the CD player you wish to start using the Fader Start function
2. Move the Crossfader all the way to the opposite side of the CD you have just Cued.
3. Press the Fader Start Relay button so that the button becomes illuminated.
4. At the point which you wish to start the audio from the Cued CD, simply move the Crossfader in
the direction of the Cued CD player, playback will begin.
5. When the Crossfader is moved all the way to the opposite side of the currently playing disc, the
unit will stop playing that disc and return to the beginning of the track or the set cue point.
14