DAPAudio CM-87 사용자 설명서 - 페이지 8

{카테고리_이름} DAPAudio CM-87에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio CM-87 11 페이지.

Set Up and Operation

It is always advisable to use a pop filter (not included) when recording vocals, not only to avoid overly

accentuated 'S, 'P' and 'B' sounds, but also to protects the element from moisture (spit). It is always a

good idea to store the microphone in its protection bag when not in use.

Connect the microphone to a mixer or recording device with a high quality XLR cable before turning on

the phantom power. Make sure all volume and gain controls on your mixer, mic preamp or recording

device are at their minimum volume settings when switching the phantom power on.

Once the CM-67 is plugged in and the phantom power is switched on, Move the channel fader

gradually to the 0dB position adjust the input gain using your channel peak led or VU-meter.

Frequency and Polar Diagrams