DAPAudio D145173B 매뉴얼 - 페이지 12
{카테고리_이름} DAPAudio D145173B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio D145173B 13 페이지.
페이지 인쇄Maintenance
The DAP Audio EM-193B requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Troubleshooting
DAP Audio EM-193B
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, set the switch on the EM-193B in OFF position.
2. Check the batteries, etc.
3. If all of the above appears to be O.K., Set the switch in ON position.
4. If you are unable to determine the cause of the problem, do not open the EM-193B, as this may
damage the unit and the warranty will become void.
5. Return the EM-193B to your DAP Audio dealer.
Product Specification
Type:
Polar pattern:
Frequency Response:
Max. SPL:
Power supply:
Carrier Frequency Range:
RF Output:
Stability:
Frequency Deviation:
LCD Display:
Controls:
Spurious Rejection:
Dimensions:
Net. Weight:
Design and product specifications are subject to change without prior notice.
Dynamic, moving coil
Cardioid
50-16.000 Hz
138 dB (1% THD)
2x Battery UM3, AA1.5V (not included)
502-960 MHz
10 mW
±0.005%
±48 kHz
Frequency, battery fuel gauge
Power On/Off, mode setting, AF Level Control, Frequency Up/Down, Lock-
on mode
<-60 dBC
Ø 50 mm x L 260 mm
0,262 kg
Website:
www.Dap-audio.info
Email:
11