DAPAudio D145182 제품 설명서 - 페이지 8

{카테고리_이름} DAPAudio D145182에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio D145182 13 페이지.
DAPAudio D145182에 대해서도 마찬가지입니다: 제품 설명서 (13 페이지)

Changing the frequency of the transmitter

1) Press and hold the set(1) button for 3 seconds. The display shows FREQUE. After a second, the display

shows the actual frequency while the MHz symbol blinks.

2) Use the up(3) and down(2) buttons to select the desired frequency.

3) Press the set(1) button again to store the setting. The display will briefly show STORE. Now the setting is

stored in memory.

Changing the sensitivity of the microphone

1) Press and hold the set(1) button for 3 seconds. The display shows FREQUE. After a second, the display

shows the actual frequency while the MHz symbol blinks.

2) Tap the set(1) button until the display shows SENSIT.

2) Use the up(3) and down(2) buttons to select the sensitivity.

3) Press the set(1) button again to store the setting. The display will briefly show STORE. Now the setting is

stored in memory.

Locking the EM-193

The EM-193 has a locking function. When activated, the locking function blocks all keys so you can't

accidentally switch the EB-16 off or change the frequency while performing.

1) Press and hold the set(1) button for 3 seconds. The display shows FREQUE.

2) Tap the set(1) button until the display shows LOC OFF.

3) Press the Up(3) buttonto turn the lock function on.

4) Press the set(1) button again. The display will briefly show STORE. Now the setting is

stored in memory.

Unlocking the EM-193

1) Press and hold the set(1) button for 3 seconds. The display shows FREQUE.

2) Tap the set(1) button again unti the display shows LOC ON.

3) Press the Down(2) button to turn the lock function on.

4) Press the set(1) button again. The display will briefly show STORE. Now the setting is

stored in memory.