DAPAudio COM-51 사용자 설명서 - 페이지 10

{카테고리_이름} DAPAudio COM-51에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio COM-51 20 페이지. 4 channel wireless microphone set

Press UP/DOWN to change the settings. After changing the settings, please press the SET button to

confirm. Otherwise it won't effect and the system will remain in the precious state.

When you have selected a new channel or frequency and you haven't pressed SET, the LCD will flash to

remind you. When you press SET, the LCD stops flashing.

Signal Channel solution Menu

Scroll through the menu by using the SET button, until the LCD shows:

after 3 seconds the display shows:

Note: Which screen is shown, depends on the previous setup.

When you press UP / DOWN, the LCD indicates 2 modes, either Channel or Frequency. If you select

channel, CHANNL is shown as numerical value. If you select FREQU, it is shown as actual working

frequency. After selecting, you must press SET. Otherwise, your setting is not stored.

After you change and you don't confirm, the LCD flashes as a reminder. Press SET and the LCD will stop

flashing.

Scroll through the menu by using the SET button, until the LCD shows:

after a second the display shows:

You can now change the frequency with the UP / DOWN buttons (steps of 0.025 Hz to change the

frequency). To confirm you have to press SET. If you don't press SET, the LCD display will keep flashing.