DAPAudio COM-52 제품 설명서 - 페이지 4

{카테고리_이름} DAPAudio COM-52에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio COM-52 19 페이지.

페이지 인쇄

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

be qualified

follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.



Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!



Never remove warning or informative labels from the unit.



Never use anything to cover the ground contact.



Never leave any cables lying around.



Do not open the device and do not modify the device.



Do not insert objects into air vents.



Do not connect this device to a dimmerpack.



Do not switch the system on and off in short intervals, as this would reduce the system's life.



Only use device indoor, avoid contact with water or other liquids.



Avoid flames and do not put close to flammable liquids or gases.



Always disconnect AC adapter from the mains, when device is not used or before cleaning! Only

handle the AC adapter by the plug. Never pull out the AC adapter by tugging the power-cord.



Make sure you don't use the wrong kind of cables or defective cables.



Make sure that the available voltage is not higher than stated on the rear panel.



Make sure that the power-cord is never crimped or damaged. Check the system and the power-

cord from time to time.



If system is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.



If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your system. Leave

the system switched off until it has reached room temperature.

Keep this device away from rain and moisture!

BEFORE YOUR INITIAL START-UP!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

CAUTION!