DAPAudio EB-16 매뉴얼 - 페이지 7

{카테고리_이름} DAPAudio EB-16에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio EB-16 16 페이지. Wireless pll 614-638 mhz / 740-764mhz / 822-846 v3
DAPAudio EB-16에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

EB-16 Wireless PLL

Set Up and Operation

Before turning the EB-16 on, always make sure that the frequency range is allowed in your country.

Names and Functions

01) Open the battery compartment.

02) Put 2 batteries (2x Battery UM3, AA1.5V) in the holder. Pay attention to the polarity of the batteries

and put the batteries correctly in the battery compartment. Close the battery compartment again.

03) Set the switch on top in the ON position. The LED will light green if the unit is working correctly. If the

LED lights up red, you need to change the batteries.

Altering the settings

01) To alter the channel setting, please rotate the channel switch, using the supplied screwdriver.

02) To alter the Gain adjustment, please turn the trimmer using the supplied screwdriver.

Ordercode: D143261