Belimo VRD3-RE2-SET 설치 매뉴얼

{카테고리_이름} Belimo VRD3-RE2-SET에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Belimo VRD3-RE2-SET 9 페이지.

VRD3-RE2-SET

VAV-Universal Retrofit Set for utilisation

of existing VAV devices made by various

manufacturers.

• VRD3-RE2-SET for air velocity

up to 12 m/s.

Note

Suitable only for round VAV boxes.

General Information

Package contents

installation instructions

Safety notes

www.belimo.eu

Installation VAV-Universal Retrofit-Set

The VAV-Universal Retrofit Set makes possible an efficient replacement of VAV and CAV devices

Application

made by various manufacturers. Each package contains all of the component parts required for

making the conversion.

These installation instructions describe the application of the VAV-Universal Retrofit Set

VRD3-RE2-SET. For a detailed description, we draw your attention to the separate product

documentation of the VRD3 and NM24A-V, see www.belimo.eu ¦ Documentation ¦ Room and

System Solutions.

Belimo Automation AG can at any time implement changes and improvements without prior

notification. For the current edition of the operating instructions, see www.belimo.eu

• The device is not allowed to be used outside the specified field of application, especially not

in aircraft or in any other airborne means of transport.

• It may only be installed by suitably trained personnel. Any legal regulations or regulations

issued by authorities must be observed during assembly.

• The device may only be opened at the manufacturer's site. It does not contain any parts that

can be replaced or repaired by the user.

• The cable must not be removed from the device.

• When calculating the required torque, the specifications supplied by the damper

manufacturers (cross-section, design, installation site), and the air flow conditions must be

observed.

• The device contains electrical and electronic components and is not allowed to be disposed

of as household refuse. All locally valid regulations and requirements must be observed.

M4-VAV-Universal Retrofit Set • en • v1.1 • 04.2011 • Subject to changes

VAV controller VRD3-RE2

Damper actuator NM24A-V-RE2

Pick-up device ZPD-RE2

Anti-rotation strap

Form-fit insert 8 x 8 mm

1 / 9