Abus PLBW10100 매뉴얼 - 페이지 13

{카테고리_이름} Abus PLBW10100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus PLBW10100 18 페이지. Nexello motion detector
Abus PLBW10100에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)

페이지 인쇄

2.6. Behaviour PIR sensor

Warm up phase

It takes about 1 minute for the PIR sensor to warm up after the battery is inserted and for the unit to

signal motion alarms.

Hint:



This has no effect on the inclusion/exclusion process.



After removing the batteries, wait 5 seconds before inserting them again.

PIR waiting time

As soon as motion is detected, the device's LED lights up and it sends a motion alarm to the Z-Wave

controller. The device now waits for a preset time (waiting time) until it acknowledges the motion alarm

to the Z-Wave controller.

Each new movement during the waiting period resets the time span. Only when the waiting time has

elapsed without motion detection will the detector acknowledge the motion alarm and thus be able to

send a motion alarm when a new motion is detected.

The standard waiting period is 1 minute. Changes have a significant effect on the expected battery

life.

PET immunity

You can activate the PET immunity of the motion detector by setting parameters. With activated

immunity, animals up to approx. 38kg are ignored.

Depending on the size of the object, the speed of movement and the installation location, it is possible

in exceptional cases that when the function is activated, animals trigger an false alarm or people do not

trigger an alarm. We therefore recommend that you only activate the function, if it is really necessary

and monitor the area with additional sensors (e.g. Magnetic contacts).

English