DAPAudio DLM-12A 사용자 설명서 - 페이지 11
{카테고리_이름} DAPAudio DLM-12A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio DLM-12A 16 페이지.
페이지 인쇄DLM-12A / DLM-12SA
Two Active Subwoofers & Two Active Satellite Speakers
1)
Make your initial connections with all the equipment powered off and ensure that all the main
volume controls are turned completely.
2)
Connect one side of the signal cable at your audio mixer into OUTPUT LEFT/RIGHT and the other side
of the cable into the Left/Mono input of your active DLM subwoofers.
3)
Connect one side of another signal cable at your active subwoofers into the HIGHPASS Output and
the other side of the cable into the LINE INPUT (COMBO) of your active satellite speakers.
4)
Connect the power cords to main.
5)
Turn on your mixer first, then the active speaker cabinets.
6)
Turn up the volume controls of the active speaker cabinets.
7)
Use PFL function to get the proper input level for the mixer and adjust the Main Mix Level.
8)
After using your equipment, turn off your active speaker cabinets first, then the mixer.
Ordercode: D3223 / D3224
10