DAPAudio PSS-108 MKII 매뉴얼 - 페이지 8
{카테고리_이름} DAPAudio PSS-108 MKII에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio PSS-108 MKII 16 페이지.
DAPAudio PSS-108 MKII에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)
페이지 인쇄PSS-108 MKII / PSS-110 MKII
PSS-108 MKII
Volume control Channel 1
Use this control to adjust the volume of the mic/line 1 channel input (17)
Volume control Channel 2
Use this control to adjust the volume of the mic 2 channel input (18)
Volume control Channel 3
Use this control to adjust the volume of the line 3 channel input (19)
Connection indicator wireless microphone 1
Pairing status indicator:
Blinking:
In pairing status
Continuous:
Microphone connected with PSS-108 MKII/ PSS-110 MKII
Volume control wireless microphone 1
Use this control to adjust the volume of the wireless microphone 1
Line / Mic. Switch
Select the input source on Channel 1 (Line / Mic)
Battery level indicator
Battery status
Volume control wireless microphone 02
Use this control to adjust the volume of the wireless microphone 2
Recharge indicator
When charging, the LED is burning continuously
Power LED indicator
This LED indicates when the power is switched on.
Line / Mic in connector 1
This combined jack can be used to connect a mono signal, such as a XLR microphone or a ¼" jack
connector which connects to line-level signal sources.
Mic in connector 2
The balanced XLR input connects to microphones.
RCA unbalanced input Channel 3
These are unbalanced stereo RCA pin jacks.
Signal indicator wireless microphone 2
Pairing status indicator:
Blinking:
In pairing status
Continuous:
Microphone connected with PSS-108 MKII/ PSS-110 MKII
Line out
Connect to the line input of a Mixer.
Ordercode: D2608 / D2609
PSS-110 MKII
7