DAPAudio PSS-108 MKII 매뉴얼 - 페이지 8

{카테고리_이름} DAPAudio PSS-108 MKII에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio PSS-108 MKII 16 페이지.
DAPAudio PSS-108 MKII에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

PSS-108 MKII

Volume control Channel 1

Turn this control to adjust the volume of the mic/line 1 channel input (15).

Volume control Channel 2

Turn this control to adjust the volume of the mic 2 channel input (16).

Volume control Channel 3

Turn this control to adjust the volume of the line 3 channel input (17).

Connection indicator wireless microphone 1

Pairing status indicator:

Blinking:

pairing in progress

Continuous:

Microphone connected with PSS-108 MKII

Volume control wireless microphone 1

Turn this control to adjust the volume of the wireless microphone 1.

Line / Mic. Switch

Select the input source for channel 1 (Line / Mic).

Battery level indicator

Battery status.

Recharge indicator

When charging, the LED is continuously on.

Power LED indicator

This LED indicates when the power is switched on.

Line / Mic IN connector 1

This combined jack can be used to connect a mono signal source, for example an XLR

microphone. You can also use the ¼" jack connector to connect line-level signal sources.

Mic IN connector 2

Use this balanced XLR input to connect microphones.

RCA unbalanced input Channel 3

Unbalanced stereo RCA jacks.

Line out

Connect to the line input of a mixer.

Ordercode: D2608

Fig. 03