Duratool D03412 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Duratool D03412에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratool D03412 4 페이지. Weighing scale
페이지 인쇄
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
Avoiding exposure to extreme heat or cold, your scale works better when operated
at normal room temperature.
•
Allow sufficient warm up time. Usually 30 seconds to give the internal components
time to stabilize before use.
•
Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents
and a close proximity to other electronic equipment can all cause an adverse effect
on the reliability and accuracy of your scale.
•
Handle with care. Gently apply all items to be weighed onto the tray top.
•
Avoid shaking, dropping or otherwise shocking the scale. This is a precision
instrument and must be handled with extreme care.
•
Only operate the scale on a stable, flat, vibration free surface.
•
Always remove the batteries if the scales are not to be used for long periods.
WHAT'S INCLUDED
•
Weighing Scales
•
Instruction manual.
BASIC OPERATION
Platform
UNIT key
LCD Display
•
Place scale on a horizontal flat surface.
•
Press [POWER] key to turn on the scale.
•
Wait until the LCD displays "0.0".
•
Press the [UNITS] key to switch between the weighing units.
•
Put the object(s) to be weighed on the weighing platform.
FUNCTIONS
TARE WEIGHING:
•
Turn on scale as described above.
•
Press the [UNITS] key to switch between the weighing units if required.
•
Wait until the LCD displays "0.0".
•
Place the "tare item" (eg: container) on the platform.
2
POWER/TARE key