DuraTrel Courtyard Arbor 11111 조립 지침 - 페이지 5

{카테고리_이름} DuraTrel Courtyard Arbor 11111에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DuraTrel Courtyard Arbor 11111 5 페이지.

ARBOR INSTALLATION

Option 1

Slide one 24" steel u-channel ground anchor

(part 10) into bottom of each post. Slide

ground anchor until it meets bottom cross

rail. Using 1" self-tapping white-head screw

fasten post to ground anchor.

Using ground anchor installation layout

drawing, dig holes approximately 16" deep.

Set arbor in holes and level. Back fill with soil

removed from holes. For permanent

installation fill with cement.

Option 2

Using ground anchor installation layout

drawing , pound ground anchors into ground

according to dimensions. When pounding

into ground, use block of wood to prevent

ground anchor from bending.

Slide arbor over ground anchors. Using 1"

Ground Anchor

self-tapping white-head screw fasten post to

ground anchor.

Installation Layout

Option 3

Using ground anchor installation layout

drawing, dig holes 16" deep according to

dimensions. Fill with cement and place

ground anchors in wet cement. Be sure that

ground anchors are straight and in accordance

with dimension of ground anchor installation

layout drawing. Allow cement to dry. NOTE:

There is very little room for error with this

installation method.

Slide arbor over ground anchors. Using 1"

self-tapping white-head screw fasten post to

ground anchor.

Courtyard Arbor 5