DuraTrel Melrose Trellis 11191 조립 설명서 - 페이지 5

{카테고리_이름} DuraTrel Melrose Trellis 11191에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DuraTrel Melrose Trellis 11191 6 페이지.

Ground Anchor Installation

Option 1 (soft ground)

Slide one ground anchor (part 12) into bottom of each

post until it meets bottom cross rail. Using two 1" self-

tapping screws per post, screw the post to ground

anchor using the pilot holes for guides.

Using ground anchor installation layout drawing, dig

holes approximately 12" deep. Set trellis in holes and

level. Back fill with soil removed from holes.

Option 2 (permanent installation)

NOTE: There is very little room for error with this

installation method.

Ground Anchor Layout Drawing

Using ground anchor installation layout drawing, dig

holes 12" deep according to dimensions. Fill with

cement and place ground anchors in wet cement. Be

34.75"

sure that ground anchors are straight and in accordance

with dimension of ground anchor installation layout

drawing. Allow cement to dry.

Slide trellis over ground anchors. Using two 1" self-

tapping screws, fasten post to ground anchor.

Melrose Trellis - Page 5