Addonics Technologies ADU3ESA 사용자 설명서 - 페이지 2

{카테고리_이름} Addonics Technologies ADU3ESA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies ADU3ESA 2 페이지. Usb 3.0 to esatap adapter
Addonics Technologies ADU3ESA에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)

페이지 인쇄

Drive Activity LED

Power LED

eSATAp (Hybrid eSATA) port for

connecting eSATA or eSATAp

storage device

Type of USB Port:

USB 3.0 - Green Power LED

USB 2.0 - Orange Power LED

Drive Activity LED:

Blinking red color if there is drive activity on the eSATA storage device connected to

the USB3.0 to eSATAp adapter.

Note: The USB3.0 to eSATAp adapter is compatible with hardware port multipliers

where the hard drives are configured as a single raid volume. The current firmware of

the USB3.0 to eSATAp adapter also supports individual hard drive mode when

connected to the Addonics HPM-XA. In this mode, the system sees a single USB

device with multiple drive letters. Removing any of the storage units (or drive letters)

associated with the single USB device forces the USB to reset with the reduced

number of drives. During the reset, any ongoing drive activities for other drives

connecting to the USB 3.0 adapter will be terminated. So it's important to make sure

all drives are inactive before removing any device from the port multiplier connecting

to the USB 3.0 - eSATAp adapter.

www.addonics.com

Phone:

Fax:

Email:

(Optional) USB Extension Cable to Computer/System

408-573-8580

408-573-8588

http://www.addonics.com/sales/query/

To any Computer/System USB3.0/2.0 Port