Duratuf Garrison Sheds PL64 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} Duratuf Garrison Sheds PL64에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratuf Garrison Sheds PL64 16 페이지.

ASSEMBLE DOOR

SELECT:

2 x 1.940 m Door Sheets (Narrow)

2 x 0.945 m Door Top/Bottom Flashings

2 x 1.940 m Door Side Flashings

3 x Hinges

1 x Padbolt Support Flashing

2 x 1.200 m Door Brace Flashings

59 x Rivets

STEP 1:

•

Lay out door sheets on a flat surface

making sure narrow pans are on the

outside.

•

Rivet sheets together in the centre en-

suring ends are flush with each other.

STEP 2:

•

Position door side flashings and top

and bottom flashings and assemble

door as shown.

•

Drill and rivet as per diagram.

STEP 3:

• Attach hinges to door side flashing using rivets provided.

Ensure hinge is flush with back of door, and 60mm in from

each end as per fig.2.

• Using one rivet, attach padbolt support as shown in fig. 1.

STEP 4:

• On the back of the door, place door braces in posi-

tion as shown in fig.3.

• Ensure that the top and bottom ends of the braces

are under the door flashings as shown in fig.4. and

opposite ends of the braces overlap in the middle.

• Rivet door brace flashings onto back of door as

shown. Where possible, rivet from front of door.

fig.2

Hinges

fig.4

fig.1

NARROW PANS

fig.3