Duratuf KL1 조립 지침 매뉴얼 - 페이지 15

{카테고리_이름} Duratuf KL1에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratuf KL1 16 페이지. Kiwi series

Step 3:

On the left hand Door Jamb, position latch as

shown, at correct height to door handle. Rivet in

place with four rivets.

RAISED FLOOR MODIFICATION

For sheds being placed on a purpose built floor, (concrete, cob-

bles, ply etc.), the Wall Sheets will protrude 20mm below the

Base Plate. This will stop water flowing in between the Base

Plate and Floor.

The Floor should be made 15mm smaller than Base Size.

Note:

Although it is not essential, fitting Damp Proof Course

in between the Base Plate and the Floor will give add-

ed protection against moisture.



Remove all swarf (drill filings) with a soft brush or rag.



Hose down roof and walls thoroughly.



For Coloursteel sheds use touch-up paint provided on all nail heads, rivets and exposed cuts.

SECURITY DOOR (Optional)

CLEAN UP