Duratuf Sentry Shed SL1507 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} Duratuf Sentry Shed SL1507에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratuf Sentry Shed SL1507 15 페이지.

ASSEMBLE DOOR

SELECT:

1 x 1.810 m Door Sheet

2 x 0.545 m Door Top/Bottom Flashings

2 x 1.810 m Door Side Flashings

2 x 0.915 m Door Braces

1 x Padbolt Support Flashing

2 x Hinges

45 x Rivets

STEP 1:

•

Lay out 1 x 1.810m Door Sheet on a flat

surface.

STEP 2:

•

Position door side flashings and top

and bottom flashings and assemble

door as shown, ensuring narrow

face of flashing is on the front as

per fig. 1

STEP 3:

• Attach hinges to door side flashing using

rivets provided. Ensure hinge is flush

with back of door, and 60mm in from

each end as per fig.2.

• Using six rivets, attach padbolt support

as shown in fig. 3.

STEP 4:

• On the back of the door, place door braces in posi-

tion as shown in fig.4.

• Ensure that the top and bottom ends of the braces

are under the door flashings as shown in fig.5 and

opposite ends of the braces overlap in the middle.

• Rivet door brace flashings onto back of door as

shown. Where possible, rivet from front of door.

fig.1

fig.2

fig.5

fig.3

Hinges

fig.4