Duratuf KIWI KL1 조립 지침 매뉴얼 - 페이지 15

{카테고리_이름} Duratuf KIWI KL1에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratuf KIWI KL1 16 페이지.

Step 3: On the left hand Door Jamb, position latch as

shown, at correct height to door handle. Rivet

in place with four rivets.

RAISED FLOOR MODIFICATION

For sheds being placed on a purpose built floor,

(concrete, cobbles, ply etc.), the Wall Sheets will pro-

trude 20mm below the Base Plate. This will stop water

flowing in between the Base Plate and Floor.

The Floor should be made 15mm smaller than Base

Size.

Note:

Although it is not essential, fitting Damp Proof

Course in between the Base Plate and the Floor

will give added protection against moisture.

•

Remove all swarf (drill filings) with a soft brush or rag.

•

Hose down roof and walls thoroughly.

•

For Coloursteel sheds use touch-up paint provided on all nail heads, rivets and exposed cuts.

SECURITY DOOR (Optional)

CLEAN UP