DURAVAC EATC608S 0401 운영자 매뉴얼 - 페이지 7
{카테고리_이름} DURAVAC EATC608S 0401에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DURAVAC EATC608S 0401 12 페이지. Ash vacuum
페이지 인쇄
LED WORK LIGHT USE
When vacuuming in a dark room or in the corner of a fireplace or stove, the LED Work Light can
help shed some light on the work area.
Attach the LED Work Light to the crevice tool or wand with the included hook and loop strap, and
switch it on when you need more light. (Fig. 1 & Fig. 2)
1
2
There are two replaceable button cell batteries in the LED Work Light. You can change them by
yourself when the LED is turned off.
Use only a CR 2016 3V button cell battery with your LED Work Light.
Use a properly size of slotted screwdriver to open the battery cover.
1
2
3
1. Insert the screwdriver into the slot on both sides of battery cover (Fig. 1) and remove the
battery cover.
2. Carefully replace both button cell batteries with a new set of batteries. (Fig. 2)
3. Close the cover by pressing the cover into the LED work light housing with proper force. (Fig. 3)
4. Check if the battery cover is closed and the light turns on and off.
CAUTION! This product contains a button battery. If swallowed, it could cause severe injury or
death in just 2 hours. Seek medical attention immediately!
7