DuraVent polypro 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} DuraVent polypro에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DuraVent polypro 16 페이지. Single-wall gas vent system for category ii & iv gas-burning appliances
페이지 인쇄A MAJOR CAUSE OF VENT RELATED FIRES IS FAILURE
TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO
COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE
THAT POLYPRO® BE INSTALLED ONLY IN ACCORDANCE WITH
WARNING
CARBON MONOXIDE POISONING
HAZARD. Failure to follow the steps
outlined below for each appliance
connected to the venting system being
placed into operation could result in
carbon monoxide poisoning or death.
•
Examine all components for possible
shipping damage prior to installation;
•
Read all instructions before beginning
the installation and follow these
instructions exactly as written.
•
Proper joint assembly is essential for a
safe installation. Check the integrity of
ALL joints upon completion of assembly
•
This venting system must be free to
expand and contract under normal
operation.
•
Assure unrestricted vent movement
where required through walls, ceilings
and roof penetrations.
•
This venting system must be supported
in accordance with these instructions.
•
Do not mix pipe, fittings, or joining
methods from different vent system
manufacturers. Do not use adhesives
of any kind with this venting system.
insurance and safety listing of your
appliance. Acceptance of the installed
system is dependant on full compliance
with these installation instrucitons
THESE INSTRUCTIONS.
WARNING
Risk of carbon monoxide poisoning
or fire due to joint separation or pipe
breakage.
Keep these instructions for future
reference.
Dear Customer, Installer, or End User:
We welcome any comments regarding
matters pertaining to our DuraVent products.
We welcome any ideas, input or complaints
to help improve our product offering.
If you are searching for tech support or
product information, please phone us at
800-835-4429.
Or email us at:
PolyPro® is one of M&G DuraVent's line of
products.