DARCHE DUSK TO DAWN+ 사용 설명서 - 페이지 3

{카테고리_이름} DARCHE DUSK TO DAWN+에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DARCHE DUSK TO DAWN+ 5 페이지.

I N S T R U C T I O N

Step 3

Before attempting to insert the composite pole onto the second pin, ensure the pole sleeve is centred on the pole.

Place you palm under the pole end, and push upward until there is a gap between the pole end and the second pin.

Insert the second pin.

IMPORTANT: DO NOT BEND THE POLE TO INSERT THE SECOND PIN.

Repeat this process for the other pole whilst correcting the swag skin as you assemble.

M A N U A L

Step 4

Clip the swag to the composite poles. A good technique for attaching the clips is to alternate from one side to the

other - top left, then top right, second left and then second right and so on.

Step 5

Stretch out the base of the swag to ease assembly when placing the spreader pole. Insert the spreader pole into one

of the centre eyelets.

Step 6

Release the trigger to extend the spreader pole and insert into the eyelet at the other end. Tension the bar to stretch

the swag into shape then lock into position.

D A R C H E . C O M . A U