Contempo Fireplaces PFM42 주택 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Contempo Fireplaces PFM42에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Contempo Fireplaces PFM42 8 페이지. Contempo pfm series and c-thru fireplaces homeowner's guide
Contempo Fireplaces PFM42에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지)

페이지 인쇄

Chimney System

The chimney is made of metal. It extends from the top of the fireplace through the roof and is capped with a

screened termination. The inner liner (flue) of the chimney is made of stainless steel and allows exhaust of

gases (carbon monoxide) from the fire. The outer liner is made of galvanized steel and provides the passage for

cooling air to keep the chimney safe at tested clearances to combustible building materials.

Damper

The damper is the metal disk found at the base of the chimney (flue) and has two positions: open and closed.

(See 'Damper Operation' below.)

Damper Operation

The flue gas damper is located inside the firebox, and is similar to the damper found on a conventional masonry

fireplace. Look within the top of the fireplace and locate the damper handle extending from the damper. Pushing

the lever up opens the damper. Pulling down closes it. This action can be easily accomplished with a fireplace

poker.

Combustion Air Kit

When the fireplace has, or may be, converted to all gas burning, a combustion air kit should be installed at the

same time as the fireplace.

Fireplace Grate

The unit has an optional grate designed to keep the operation of your fireplace efficient and safe. Do not

attempt to defeat its purpose. The size and position of the grate have been engineered to give the ideal

combustion characteristics for the fire. By keeping your logs within the grate and not on the hearth, you will

prevent the chance of having a log "spill" or rollout of the fireplace. DO NOT OVERLOAD THE FIREPLACE.

Piling excessive wood on your grate will not increase efficiency, and could cause smoke to enter your room.

When replacing the grate, use only the appropriate Contempo replacement grate for your fireplace model.

• Keep the grate behind the fixed andiron fence.

• Open the flue damper.

• Build a proper fire.

• Use solid dry wood that has been seasoned for at least one year, or processed solid firelogs only.

• Criss-cross small pieces of wood and place crumpled newspaper under them.

• Place several logs on grate. DO NOT OVERLOAD OR FILL BEHIND THE GRATE.

• Light the newspaper, or gas log lighter if one has been installed.

• Close the fire screen (optional accessory: see the Contempo Fireplace Accessories & Options').

• In cold weather, to assure proper draw, preheat the flue by burning a crumpled newspaper in the damper

area. This will help to heat the flue. Open the damper before this procedure is started.

• After using the fireplace, do not close the damper until you are certain there are no warm embers.

• Warning: If you are using processed solid fuel fire logs, do not poke or stir the logs while they are burning. Use

only firelogs that have been evaluated for the application in fireplace and refer to firelog warnings and caution

markings on packaging prior to use.

• This fireplace is not intended to be used as a substitute for a furnace to heat an entire home. Use for

supplementary heating only.

Operating Your Fireplace

CAUTION: WHEN OPERATING THIS FIREPLACE, THE FIREPLACE DAMPER MUST BE SET IN

THE FULLY OPEN POSITION.