Contemporary Controls CTRLink EIDX MP Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} Contemporary Controls CTRLink EIDX MP Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Controls CTRLink EIDX MP Series 8 페이지. Managed poe pse ethernet switching hubs

페이지 인쇄

INSTALLATION

Mounting

The EIDX is designed for mounting in an industrial enclosure or wiring closet

using either set of the provided mounting hardware listed below:

TS-35 DIN Rail Mounting

DIN rail clip

M3x5 screws, flat-head (4)

For quick snap-mounting to 35 mm DIN rail, a reinforced DIN rail clip is pre-

attached to the back of the EIDX enclosure with four M3x5 flat-head screws. If

the clip is removed, the EIDX can be panel-mounted by extending the top and

bottom brackets which are shipped in retracted position. The extended brackets

can then anchor the EIDX to a wall or other flat vertical surface with two #8

pan-head screws (not provided). The left illustration of Figure 3 shows a rear

view of the EIDX with brackets in retracted position. The right illustration of

Figure 3 shows the brackets extended and secured to the EIDX enclosure with

the same screws used in retracted position.

Figure 3 — Using the Panel-Mounting Brackets

Panel Mounting

Panel mounting bracket

M3x5 screws, flat-head (4)

TD071100-0IA