Contemporary Controls CTRLink EISC-100T 설치 매뉴얼
{카테고리_이름} Contemporary Controls CTRLink EISC-100T에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Controls CTRLink EISC-100T 8 페이지. Ethernet configurable switching hub
페이지 인쇄EISC-100T
Ethernet Configurable Switching Hub
INSTALLATION GUIDE
Introduction
®
The EISC-100T (EISC) configurable switch in the CTRLink
family
provides capabilities beyond those of standard Plug and Play (PnP)
Besides conventional features — auto-negotiation, 10/100
switches.
Mbps data rate, flow control, half- or full-duplex operation — the EISC
has advanced features such as VLAN, trunking, Quality of Service (QoS)
and a programmable fault relay that can be connected to a supervisory
system. Individual port parameters can be configured via a console port
®
attached to a Windows
-based workstation. Port status can also be
monitored through the console port using the Modbus protocol, making it
easy to interface the EISC with supervisory control equipment. These
features make the EISC one of the most versatile of Industrial Ethernet
switches available.
Configuration is accomplished via a console port connected to a
Windows-based configuration program included with the product.
Modbus protocol and register information is also provided so the switch
can be configured or monitored by a Modbus master device. Each port
parameter (data rate, duplex and flow control) can be pre-set via the
console port or set automatically via auto-negotiation. And a unique feature
displays the status (integrity) of the cable attached to any each port.
Each port automatically optimizes its data rate to 10 Mbps or 100 Mbps
— but data rate and duplex settings can be specified, if desired.
Each port negotiates flow control, but control can be disabled for
individual ports. The PAUSE function is supported for full-duplex links.
The backpressure scheme is used for half-duplex segments.
The EISC can be powered from wide-range, low-voltage
AC or DC sources and has provisions for either DIN-rail
or panel mounting.