Addonics Technologies DIEDES 설치 매뉴얼 - 페이지 2
{카테고리_이름} Addonics Technologies DIEDES에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies DIEDES 2 페이지. Diamond exdrive
페이지 인쇄
For IDE Drive
Note: Set up your IDE hard drive
as Master device
Connect the 4-Pin Molex cable to
the power connector on the IDE
hard drive. Carefully place the IDE
hard drive with the label facing up
into the Diamond enclosure. Push
the hard drive towards the back end
to secure the drive connectors onto
the Diamond enclosure's IDE
connector.
Step 4
Turn the Diamond enclosure over
with the hard drive
mounting holes facing up. Use the
included flat head
screws to secure the hard drive
onto the bottom of the
enclosure and turn in the screw to
the "LOCK" position.
Cable Connections
Power: Connect the 6-pin Mini DIN power cable (provided) to the 6-pin Mini DIN
power connector located at the back of the enclosure.
Mini-Din power
connector
eSATA
On / OFF
connector
switch
Data:
Model: DSAEDES and DIEDES
Connect the eSATA to eSATA cable to the eSATA connector located at the back
of the enclosure and the other end of the eSATA cable to the eSATA connector
on your SATA host controller with eSATA ports.
Model: DSAEDEU and DIEDEU
Connect the eSATA to eSATA cable to the eSATA connector located at the back
of the enclosure and the other end of the eSATA cable to the eSATA connector
on the USB2.0 to eSATA adapter. You can now plug the adapter to a USB port
on your system.
Powering On Enclosure: To power on the enclosure, move the switch located
at the back of the enclosure to the ON mode. When the switch is turned on, the
LED light beside it would light up to indicate power and also drive access.
Note: There are no drivers needed to use the eSATA cable as long as the
drivers are installed for the Serial ATA Controller card/chip. It is plug and
play.
Technical Support
If you need assistance to get your unit functioning properly, please call Addonics
Technical Support. Our technical staff will be happy to assist you, but they will
need your help to do so. Calling the technical support staff without all the proper
information can be both time consuming and frustrating. Here are some tips to
help you out:
MODEL NUMBER – Please have this number on hand.
SYSTEM INFORMATION – Type of computer, peripherals, etc.
OPERATING SYSTEM – What version of Windows
WHAT'S THE TROUBLE? – Give enough information
about your problem so that we can recreate and diagnose it.
FREE Software Drivers for all Addonics Technologies
Products are available 24 hours per day at the
World Wide Web Site: www.addonics.com.
Contact Information
Phone:
408-433-3899
Fax:
408-433-3898
Email:
http://www.addonics.com/sales/query/
Internet: http://www.addonics.com
TECHNICAL SUPPORT
Phone:
408-433-3855
Hours:
8:30 am - 6:00 pm PST
Email:
http://www.addonics.com/support/query/