Contemporary Research ICC-ZS2 제품 설명서 - 페이지 12
{카테고리_이름} Contemporary Research ICC-ZS2에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Research ICC-ZS2 17 페이지. Lg/zenith superport controllers
Contemporary Research ICC-ZS2에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 보기 (1 페이지)
페이지 인쇄
Response
IR Key
K
IR Menu
M
Device
SP " '<',0,0,4,'SP',<number devices present>,<number devices expected> (8 bytes)
Response
Contemporary Research
Description
" '<',<dh>,<dl>,2,'K',<IR Key>" (6 bytes)
Sent when unit receives a new key command is pressed (10-116) or released (0) from
the IR remote.
0 = Release
10 - 19 = Numeric keypad entry 0 – 9
21 = Enter
22 = Channel Up
23 = Channel Down
29 = Menu
101 = Previous Channel
The 0 – 9, Channel Up/Down functions are sent only if enabled in the TM command
(Bit 2 = 1). The Channel Up/Down responses will be sent if the Tune Ring contains no
channels – see Ex2 in the Tune Ring command section.
" '<',<dh>,<dl>,5,'M',<msh>, <msl>, <mph>, <mpl>" (9 bytes)
Sent when unit receives a new Menu command is pressed or released (0) from the IR
remote. Menu Selection high and low bytes are in <msh> and <msl>. Menu
Parameter high and low bytes are in <mph> and <mpl>.
A Menu command is initiated by pressing the Menu key, followed by a numeric entry,
then the Enter or Channel Up key. During the Menu process, the Channel Down key
acts as a backspace or delete key.
Some selections that need only a single numeric entry and will have a parameter value
of zero (0). Those keys are 0, 8, 9, 18, 20, 30, 900, 911, and 912.
Menu selections that will prompt the user to enter a second parameter entry are:
1 = Select Media
2 = Password
3 = Chapter Search
4 = Frame Search
11 = Channel
21 = Page Zone
22 = Page Room
25 = Go
21 = Attach Zone
32 = Attach Room
Tip: The Menu entries are active even if the TV power is off.
Sent in response to HE status query.
Tip: If the number of present and expected devices match, the green Net LED on the
HE will blink once per second. If the two numbers do not agree, the LED blinks twice
per second.
105 = Media Menu
106 = Cursor Right
107 = Cursor Left
108 = Cursor Up
109 = Cursor Down
110 = Media Select
116 = Timer
12
ICC-ZS2 Zenith SuperPort Card