Contemporary Research ICC-ZS2 제품 설명서 - 페이지 9

{카테고리_이름} Contemporary Research ICC-ZS2에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Research ICC-ZS2 17 페이지. Lg/zenith superport controllers
Contemporary Research ICC-ZS2에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 보기 (1 페이지)

페이지 인쇄

Command

Tune Ring

Channel Labels

Display Label

Closures

Control Lock

Device Status

Contemporary Research

Description

TR "$A5,<dh>,<dl>,<ncb>,'TR', [<chan 1>, <chan N>]" (variable bytes)

This command stores a Tune Ring, a series of preset channels accessed by channel

up/down commands.

Ex1: "$A5,<dh>,<dl>,6,'TR', 5,4,8,11" sets ring to channels 5, 4, 8 and 11

Tip: The ring follows the stored order, channels do not have to be in ascending

order

x Ex2: "$A5,<dh>,<dl>,2,'TR' " clears the Tune Ring, locks unit to current channel

Tip: In the above mode, the IR Keypad channel up/down response to the Head-

End, so the system will know the user is trying to change channels. In

response, the system could change channels on a media sources, like a VCR

or satellite. (Feature not provided in 1-way models).

Ex3: "$A5,<dh>,<dl>,8,'TR', $82,5,$87,11" sets channels 2-5 and 7-11. You can

specify a range using MSB bit for the first channel; the next byte is the last.

TN "$A5,<dh>,<dl>,<ncb>,'TN',<channel>,<label>" (variable bytes)

Stores an ASCII string as the channel label. The text will appear briefly when the

channel is selected, if the feature has been activated by Setup command (TM).

Ex1: "$A5,<dh>,<dl>,6,'TN', '7', 'PBS' " TV displays PBS when 7 is selected

Ex2: "$A5,<dh>,<dl>,3,'TN', '7' " Clears alpha label for channel 7

Ex3: "$A5,<dh>,<dl>,4,'TN',0,0" Clears all alpha labels

TC "$A5,<dh>,<dl>,2,'TC' " (6 bytes) – Display current channel label for about 15 sec.

Y-

"$A5,<dh>,<dl>,3, 'Y' <I/0 Port>' " (7 bytes) Factory option only

Turns the two internal closures on and off. Closure 1 is typically used to control the

optional buzzer, Closure 2 typically used to control an external camera power relay.

"$A5,<dh>,<dl>,3, 'Y10'" turns Closure 1 off

"$A5,<dh>,<dl>,3, 'Y11'" turns Closure 1 on

"$A5,<dh>,<dl>,3, 'Y20'" turns Closure 2 off

"$A5,<dh>,<dl>,3, 'Y21'" turns Closure 2 on

LM "$A5,<dh>,<dl>,3,'LM',<control>" (7 bytes)

Locks out front panel and IR remote control functions.

Bit 7

Selects IR remote and front panel control, except volume

(0=enabled, 1=disabled)

Bit 6

Selects volume control operation for IR and front panel

(0=enabled, 1=disabled)

Bit 5-1 Always 0

Bit 0

Always 0 – Zenith does not differentiate between front panel and IR

SP "$A5,0,0,3,'SP'" (6 bytes) ICC2 and ICW units only

Queries the Head-End for the number of devices present on the network and the

number of devices expected. (Not provided in 1-way units)

ICC-ZS2 Zenith SuperPort Card