DURAVIT Starck S1 9721 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} DURAVIT Starck S1 9721에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DURAVIT Starck S1 9721 7 페이지.
페이지 인쇄
1
A 110V GFCI outlet is required.
Mark the holes to be drilled for
the anchors.
5
LIft the mirror backing up and
onto the mountain brackets.
Check the mirror backing is
leveled.
MAL_Starck_S19721/16.12.1
2
Using a 3/8" drill bit, drill the
anchor holes that have been
marked.
6
The top screw will adjust closer
and further. From the mirror,
lower screw will adjust up and
down.
3
Detach mirror front with four
screws.
7
Mark the hole to be drilled.
Remove mirror backing.
4
Lift the mirror up and slide the
mirror backing.
8
Using 3/8" drill bit, drill the
anchor holes that have been
marked. The plastic anchor
provided is for concrete wall
applications.