DURAVIT Vero VE 6413 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} DURAVIT Vero VE 6413에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DURAVIT Vero VE 6413 17 페이지.

Reference the washbasin

specification to establish the position

of mounting bolts, mark the holes

to be drilled for the anchors.

When mounting the washbasin

into a wood stud wall, there

must be adequate bracing.

We recommend doubling up

2 x 6's or 2 x 8's between

the studs to form a solid

anchoring point.

Screw mounting bolts into the

pre drilled holes with an

adjustable wrench.

Screw in the full length of the

mounting bolt, so that the lag

thread is no longer visible.

Carefully slide washbasin onto

the mounting bolts. Insert

the white plastic sleeve over

bolt and into the hole in the

washbasin.

Install provided washer and nut.

Hand tighten the nut, so the

washbasin is secure.

Install the siphon.

MAL_Vero_VE6413/15.04.1

Using 3/8" and 5/8" drill bit,

drill the anchor holes that have

been marked.

Remove the vanity drawers.

The plastic anchors provided are

for concrete wall applications.

Push and lock in pins (1) and

remove the drawer. (2)

For wood stud walls, bolt should

be screwed into wood backing.

Attach the front legs.