Addonics Technologies RT3DA5HP 사용자 설명서 - 페이지 8

{카테고리_이름} Addonics Technologies RT3DA5HP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies RT3DA5HP 8 페이지. Raid tower iii

Notes on Spare Drives using the Easy RAID Setting (EZ)

When EZ is function is ENABLED, the auto-rebuilding to spare drive is automatic.

The degraded RAID group will start rebuilding automatically by using the existing

spare drive.

* Spare drive can be either plugged before RAID building or a new drive can be plug

as the spare drive when RAID rebuild is required.

Which port acts as a spare drive?

The last drive will automatically become the spare drive.

For a 3-drive RAID5 with spare:

Drives connected to SATA ports 1~3 belong to the active RAID5 array and

drive connected to port 4 is the spare.

For a 4-drive RAID10 with spare:

Drives connected to SATA ports 1~4 belong to the active RAID10 array and

drive connected to port 5 is the spare.

For a 2-drive RAID1 with spare:

Drives connected to SATA ports 1& 4 belong to the active RAID1 array and

drive connected to port 5 is the spare.

When will rebuild action start?

•

When the raid fails and EZ is enabled, the HPM-XA will

automatically rebuild the RAID group using the spare.

•

When the raid fails and EZ is disabled, the HPM-XA will NOT

rebuild the raid group unless you install a good drive to replace the

failed drive.

www.addonics.com

Phone:

Fax:

Email:

408-573-8580

408-573-8588

http://www.addonics.com/sales/query/