Addonics Technologies SESU3CS 사용자 설명서 - 페이지 3
{카테고리_이름} Addonics Technologies SESU3CS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies SESU3CS 4 페이지. Sapphire esata/usb 3.0 drive enclosure
페이지 인쇄
eSATA cable
Power Cable
1. Loosen the two cover screws on the back of the unit found on the left and
right edges. Remove the rear cover, then slide the top cover off.
2. Remove the front plate and replace with a 5.25" drive, or a 2.5" or 3.5"
device mounted in a 5.25" mounting bracket using the 5.25" drive
mounting holes.
3. Reassemble the unit.
4. Connect the power supply from an AC outlet to the back of the unit.
5. Connect an eSATA host to the unit and turn it on. For Model AESU3CS,
optionally attach the eSATA-USB 3.0 Adapter to connect the unit to USB
host.
www.addonics.com
eSATA to USB 3.0 Adapter (Model SESU3CS)
Installation
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/