Contemporary Research QMOD-HDMI 2 제품 설명서 - 페이지 4

{카테고리_이름} Contemporary Research QMOD-HDMI 2에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Research QMOD-HDMI 2 18 페이지. Hd modulator-iptv encoders
Contemporary Research QMOD-HDMI 2에 대해서도 마찬가지입니다: 설치 매뉴얼 (11 페이지), 제품 설명서 (17 페이지), 제품 설명서 (16 페이지)

Video and Audio Input Selections

Each modulator has a different a mix of video and audio inputs, so the menus for each are different – but all
the rest of the menus and Web choices are the same. There are also differences in which Video input is
available, as noted below. You can always use the video inputs for receiving closed captioning data.
QMOD-HDMI 1.5
Program B input.
QMOD-HDMI 2
HDMI 1 | HDMI 2 | SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
If HDMI 1 is assigned to a program, you can select Video 2 for the second program, Video 1 if
HDMI 2 is used for another program. You can choose NONE for the Program B input.
None | HDMI 1 | HDMI 2 | SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
QMOD-SDI 1.5
SDI 1| YPbPr 1 | Video 1
If SDI is selected for one Program, Video 1 or Component can be used for the second program.
If Component is selected for one program, only SDI can be selected for the second program.
You can choose NONE for the Program B input.
None | SDI G1 | SDI G2 | SDI G3 | SDI G4 | Optical | Coax | Analog 1
QMOD-SDI 2
SDI 1 | SDI 2 | Video 1| Video 2
If SDI 1 is assigned to a program, you can select Video 2 for the second program, Video 1 if
SDI 2 is used for another program. You can choose NONE for the Program B input.
None | SDI G1 | SDI G2 | SDI G3 | SDI G4 | Coax 1| Coax 2 | Analog 1| Analog 2
QMOD-SDI 2
SDI 1 | SDI 2 | Video 1| Video 2
If SDI 1 is assigned to a program, you can select Video 2 for the second program, Video 1 if
SDI 2 is used for another program. You can choose NONE for the Program B input
None | SDI G1 | SDI G2 | SDI G3 | SDI G4 | Coax 1| Coax 2 | Analog 1| Analog 2
QMOD-YPB2
YPbPr 1 | YPbPr 2 | Video 1 | Video 2
If YPbPr 1 is assigned to a program, you can select Video 2 for the second program, Video 1 if
YPBPr 2 is used for another program. You can choose NONE for the Program B input.
None | SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
You can choose NONE for the