Contemporary Research QMOD-YPB 2 설치 매뉴얼 - 페이지 10
{카테고리_이름} Contemporary Research QMOD-YPB 2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Research QMOD-YPB 2 11 페이지. Hd modulator-iptv encoders
Contemporary Research QMOD-YPB 2에 대해서도 마찬가지입니다: 제품 설명서 (17 페이지), 제품 설명서 (16 페이지)
페이지 인쇄QMOD Setup
Venue Vizion system has been custom packaged with the QMOD types ordered. Each model has a different combination of inputs (HDMI,
YPB, RGB, SDI), but the setup process is the same. The QMOD-YPB2 pictured above has two component inputs.
Quick Setup – To set up additional QMODs or reassign channel numbers or inputs
Each QMOD has two encoders, Program A and Program B. Both programs are included in each channel, and a TV will show both programs
in its channel list. For example, R F Channel 2 will be shown as 2-1 and 3-1 on a TV (using the default setup for Venue Vizion systems).
Press the red SETUP button on the first QMOD to view the menu options. The "Quick" menu usually appears first. If not, use the Up/Down
arrows to scroll to "Quick", then press SELECT.
•
Channel - The first four QMODS are shipped set to Channel 2-1, 3-1, 4-1, 5-1, 6-1, 7-1, 8-1, and 9-1. Press the Down arrow to go to the
next menu.
•
RF Level – The factory default is 29 dB. This value may need to be changed depending on the RF network requirements. Press the
Down arrow to go to the next menu.
•
Program A Video Input - For the QMOD-YPB2 example shown, this is usually preset to the first HD input, "YPbPr 1". Keep the set-
ting or press the Right arrow for other inputs. Press SELECT and then the Down arrow for the next menu.
•
Program A Audio Input - This is preset to "Analog 1" for the QMOD-YPB2. Use the Right arrow to view other options. Press
and then the Down arrow for the next menu.
•
Program B Video Input - This is usually preset to the typical second input. Keep the setting or press the Right arrow for other inputs
or "None" if that input is not used. Press SELECT and then the Down arrow for the next menu.
•
Program B Audio Input - This is usually preset to the typical second input. Keep the setting or press the Right arrow for other inputs
or "None" if that input is not used. Press SELECT and then the Down arrow for the next menu.
•
Press the red SETUP button twice to exit the "QUICK" menu.
•
At this point, the system is ready to install into an equipment rack for integration with the sources.
Testing
•
Use the TV's menus to scan for cable channels.
•
The channels from all of the QMODs should now be visible on the TV.
At this point, video should appear on each channel. If no source is connected, only a color background will be shown, but it will confirm that
the QMODs are setup properly.
Page 10
SELECT