Contender C51003 조립 지침 - 페이지 2

{카테고리_이름} Contender C51003에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Contender C51003 3 페이지.

페이지 인쇄
Step 1: Using predrilled holes in Dividers and
Sides, attach Hooks to Dividers and Sides
using supplied hardware and screwdriver not
included. (12) gold screws used total.
Top
Shelf
Step 3: Slide in Dividers from back side.
(4) Hex screws and Allen wrench used in
this step. Divider attaches to Top only.
Back groove in Divider aligns with back
groove in Top. Shelf and Seat sit flush
with front edge of back groove.(4) Hex
screws and Allen wrench used in this
step.
For assistance, call: Customer Service 1­800­247­8465
Seat
Step 2: Attach Top, Seat, and Shelf to Left Side
piece. Align back groove in Top with back groove in
Left Side. This will act as guiding system for Back in
later step. Attach each component to Left Side using
(2) Hex screws and Allen wrench. (6) Hex screws
used in this step.