DURAVIT 700379 설치 지침 - 페이지 5

{카테고리_이름} DURAVIT 700379에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DURAVIT 700379 12 페이지. Bathtub with a seamless acrylic panel (corner, back-to-wall)

Important information

Mounting instructions information

These mounting instructions come as part of the Duravit

bathtub and should be read carefully prior to installation.

Target readership and qualifications

The bathtub must only be installed by trained plumbing

engineers.

Explanation of the symbols

Link to the mounting instructions in this section

Inspection (e.g. for scratches)

Indication of the length of time (e.g. 10 minutes)

Inspect to check for leaks and leak-tightness

Product and/or property damage

Careless handling can result in damage to the surface of

lacquered bathtubs.

> Protect the bathtub from knocks and scratches during

installation and transport.

A breach of local and country-specific regulations and

standards can cause damage to the product

and/or property damage.

> Observe the local installation regulations and any

country-specific standards at all times.

Mounting instructions

Please read the pre-installation information sheets prior

to the installation. These are available to download on the

Internet at www.pro.duravit.com.

Avoiding damage

> Protect the bathtub from knocks and scratches in

order to avoid damage to lacquered surfaces.

Mounting the cable-driven waste and overflow

The connecting hose #790159/#790166 is

recommended for mounting a bath spout with a waste

and overflow set or base inlet.

56770_BA_M_with integrated panel/19.02.7