4B Digimatic DML4W 운영 매뉴얼 - 페이지 14
{카테고리_이름} 4B Digimatic DML4W에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4B Digimatic DML4W 20 페이지. Radio frequency capacitance point level indicator
페이지 인쇄The Digimatic detects material by radiating a high frequency (RF) signal from the probe. The advanced
electronics of the Digimatic use this signal to measure the capacitance inside the vessel with respect to
ground and thus indicate when material has reached the Digimatic probe.
The power shield creates a barrier and enables the unit to ignore a certain amount of material built up on
the probe, helping to prevent false readings. The Digimatic's standard power shield is 121mm in length,
with options for a 160mm and 221mm available on request. Other specific lengths may be available.
Please contact us for more information.
The standard (121 mm) power shield can be used with walls that are up to 115 mm (4.5 inches) thick.
Installation through thick concrete silos only requires a 25.4 mm (1 inch) diameter hole for probe
insertion.
The actual amount of material build up that the Digimatic is able to ignore is dependant upon several
factors, including the density of the material, the moisture content of the material and the type/style of
the vessel.
POWER SHIELD OVERVIEW
NOTE
PAGE 14