APLIC 303486 사용자 설명서 - 페이지 8

{카테고리_이름} APLIC 303486에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. APLIC 303486 12 페이지. Powerbank, 3000mah, hand warmer function

4. Start-up

Take the device out of its packaging and remove any packaging material. Fully

charge the Powerbank before first use. For charging, use the microUSB port of the

powerbank (charging port).

In order to charge devices with the powerbank use the USB port (output) and

connect your preferred device to the corresponding charging cable and the pow-

erbank. You can turn the powerbank on and off by shortly pressing the „ON/OFF"

button. The blue LED lights up as soon as the device is turned on.

5. Hand warmer function

• Press and hold the „ON/OFF" button of the powerbank for about 3-5 seconds

to turn on the hand warmer function.

• Then shortly press the „ON/OFF" button to switch between two temperature

levels.

• The red status LED flashes once for heat level 1 at approximately 45°C-50°C.

• The red status LED flashes twice for heat level 2 at approximately 50°C-55°C.

Press and hold the „ON/OFF" button for about 3-5 seconds to turn off the hand

warmer function. In order to completely deactivate the device briefly press the

„ON/OFF button" again.

Notice! Please note that the hand warmer function may only be used at

low temperatures.

6. Recharging device

Connect the microUSB port (input) to an USB power source by using a microUSB

to USB type A connection cable. This can be the charger of your smartphone, a

free 5V USB port of your computer or a 5V USB car charger. During the charging

process the blue LED flashes. As soon as the process is finished it lights up

continuously.

English