APLICOM A9 PRO 설치 매뉴얼 - 페이지 12

{카테고리_이름} APLICOM A9 PRO에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APLICOM A9 PRO 13 페이지. Telematics unit
APLICOM A9 PRO에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

APLICOM A9 PRO 설치 매뉴얼

INSTALLATION CHECKLIST

Action/Functionality
DEVICE INSTALLATION
The place of installation is safe from accidental knocks and excessive humidity.
Device is fastened tightly and safely, with no possible interference with vehicle safety system like Airbag. etc.
CABLES
The cables are led carefully along a well-protected route to the device and the peripherals.
All cables are correctly connected and secured with fuses.
The cables are fastened or supported in such a way that during use they exert no torsion on the connectors.
ANTENNAS
A9 unit is fitted in such a way that its visibility to base stations is as unobstructed as possible.
GPS antenna is fitted in such a way that its visibility GPS satellites is best possible and GSM/GPRS (internal) antenna has
visibility to GSM/GPRS network.
Unit is installed as far away as possible from vehicle radio and its antennas and wirings. Make sure that the GPRS sending
of the unit does not cause disturbances to car radio or other vehicle systems. External GPS cables are led carefully along a
well-protected route to the device.
Check that vehicle windows do not have heating system that may block the GPS/GLONASS signals for example in
dashboard or windshield installations. Check the antenna right orientation towards the GPS satellites and correct fixing
place and surface.

POWER ON DEVICE

Connect PWR and if IGN is used, turn it on. If movement wake up is used, cause movement to start up the unit.
FINAL CHECK
Before completing the installation work, rigorous checking of any disturbances to vehicle or machine, where the unit is
installed, must be made. Special attention is needed to check the vehicle safety systems and radio and multimedia
equipment functions. This is to avoid recalls to service because of un-noticed problems.
TROUBLE SHOOTING
Problem
Solution
No power
Check that all the cables and fuses are connected.
PWR is connected and IGN is on (if used).
No GPRS connection
Check that SIM card is inserted.
Check PIN CODE requirements.
No GPS position
Check that the GPS antenna has open sky view.
NOTE! Electronic heated or UV-protected windshield may disturb GPS antenna sky view.
Ensure that GPS antenna is installed in right direction. This depends on used antenna type (dashboard/window mount).
If none of the above helps, please contact your equipment dealer for further assistance.
12