APLICOM A11 설치 매뉴얼 - 페이지 3

{카테고리_이름} APLICOM A11에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APLICOM A11 11 페이지.

Package content

Figure 1.

Preparation and installing of the A11 unit

The following steps must be made in right order to start the unit immediately for full operation.

1. Install microSIM card, see figure 2

2. Connect external power cabling and other needed connections

3. Mechanically install the unit to carefully selected place

4. Connect the vehicle power supply to A11 wiring power supply with fuse protection

Note! The internal battery is taken to use when microSIM card is connected and main power is switched on

(power is connected). The internal battery is disconnected immediately when microSIM card is removed.

Figure 2. MicroSIM card installation

Includes

A11 Unit

Power cable for A11 (D338000)

Dual lock fastener (4200100)

MicroSIM card is also needed. Order card

from teleoperator or from Aplicom.

Options:

GPS and GSM antennas

iButton reader for A11 (D335010)

Aplicom contactless CAN reader for

12..24V supply (D350650)

3PAD (D324310)

A11 data cable (D338020)

etc.