Aplisens ZSP-41 사용자 설명서 - 페이지 6

{카테고리_이름} Aplisens ZSP-41에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aplisens ZSP-41 16 페이지.

IO.ZSP-41.SP-11.SP-02
7.

INSTALLATION

Isolator housing allows for installation on the following rails:
 TS-32 (EN 50 035),
 TS-35 (EN 50 022).
Rail-mounted Signal Converters must be used in conditions specified in this user manual.
Clamp connection configuration and typical operation configuration is illustrated in figure 2, 5, 8,
11. Selection of input and output signals with switches while isolators are energized does not
cause damage.
8.

CONNECTING

All connection and installation steps must be performed with power disconnected.
Power supplies and isolators are equipped in plug-in connectors protecting against
incorrect wiring.
8.1.

Connecting the ZSP-41 and ZSP-41/2

The ZSP-41 isolator is only equipped with one input clamp block, mounted to clamps 1-2.
After selecting dual-line converter, the connection must be reclamped to clamps 3-4.
4
Figure 1. Housing - dimensions
03.B.005