Addonics Technologies ADSAIDE 사용자 설명서 - 페이지 2
{카테고리_이름} Addonics Technologies ADSAIDE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies ADSAIDE 2 페이지. Sata - ide converter
페이지 인쇄Installation:
1.
Locate the SATA connector of your SATA drive.
2.
Connect the converter board to the SATA connector of the hard drive.
3.
Using the provided Y-power cable, connect the 4-pin Floppy connector to
the converter. This will provide power to the converter and to the hard
drive.
4.
Connect the IDE ribbon cable to the 40-pin connector on the converter.
The red edge of the ribbon cable needs to line up to pin 1 marker of the
40-pin connector. The other end of the ribbon cable will be connected to
your motherboard's IDE channel.
15-Pin SATA Power
& 7-pin Data Connector