Addonics Technologies ADSALVD160 사용자 설명서 - 페이지 2

{카테고리_이름} Addonics Technologies ADSALVD160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies ADSALVD160 2 페이지. Sata to scsi converter
Addonics Technologies ADSALVD160에 대해서도 마찬가지입니다: 사용자 설명서 (1 페이지)

Note:
Before installing the ADSALVD160, you need to set up the SCSI host adapter
first. Once the SCSI host adapter had been configured and detected by the system,
you can now follow the instructions below.
Your SCSI host adapter must be terminated.
1. Connect one end of the SCSI cable that is connected to the SCSI host adapter to
the 68-pin female SCSI connector of the ADSALVD160.
2. Connect the SATA hard drive to the SATA interface on the ADSALVD160.
3. Using the provided Y-power cable, connect the 4-pin floppy connector to the power
connector on the ADSALVD160. This will provide power to the hard drive and the
ADSALVD160. The other end of the Y-power cable connects to the system's power
supply.
SCSI ID Setting
To change the SCSI ID setting of the SATA hard
drive connected to the ADSALVD160 refer
below
1 2 3 4 5 6 7 8
CONTACT US
www.addonics.com
Phone:
408-573-8580
Fax:
408-573-8588
Email:
http://www.addonics.com/sales/query/
On
Off
Pins 1-2
Pins 2-4
ID = 0
OFF
OFF
ID = 1
ON
OFF
ID = 2
OFF
ON
ID = 3
ON
ON
ID = 4
OFF
OFF
ID = 5
ON
OFF
ID = 6
OFF
ON
ID = 7
ID = 8
OFF
OFF
ID = 9
ON
OFF
ID = 10
OFF
ON
ID = 11
ON
ON
ID = 12
OFF
OFF
ID = 13
ON
OFF
ID = 14
ON
ON
ID = 15
ON
ON
Pins 4-5
Pins 6-8
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
ON
OFF
ON
ON