APlusLift MT1500X 설치 매뉴얼 및 작동 지침 - 페이지 13

{카테고리_이름} APlusLift MT1500X에 대한 설치 매뉴얼 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. APlusLift MT1500X 20 페이지. Motorcycle lift

APlusLift MT1500 & MT1500X

I nst a lla t ion

4 .

I N ST ALLAT I ON M a nua l

4.5 VISE INSTALLATION AND EYE BOLTS

The front wheel clamp mounts directly onto the front of either the table assembly or the

front extension, depending on which configuration you prefer to set your lift up in (There are 2

positions on the front extension for mounting - allowing 3 separate configurations.) Simply bolt

the movable clamp onto the left side of the lift as you look at it from the rear using the provided

bolts. Next, mount the stationary clamp onto the right side of the lift.

The APlusLift MT1500 & MT1500X both come with an adjustable front wheel stop. To

install this piece, simply use the pin provider onto the front of the table assembly or front

extension, again depending on which configuration you opt to use for your lift.

BEFORE LIFTINg: Always tie down the equipment on four corners using the tie

down straps and tie down eyelets mounted on the lift table's surface. Do this every time

before operating the lift! See Figure 4.3 for the diagram of where Eyelets can be placed.

Please see the pictures below for proper installation of the wheel vise and information about

tie-down eyelets.

Figure 4.2

Reference for proper wheel vise installation.

Figure 4.3

4 tie-down eyelets provided with this lift can be

placed in several locations and must be used to

secure loads before any attempt is made to lift them.

www.apluslift.com

13 of 20

Phone: 800-616-9618 Text: 425-300-2600 Email: [email protected]

2020