APlusLift HW-10KBP 설치 및 운영 매뉴얼 - 페이지 17

{카테고리_이름} APlusLift HW-10KBP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APlusLift HW-10KBP 20 페이지. 2-post floor plate car lift 10,000lb capacity
APlusLift HW-10KBP에 대해서도 마찬가지입니다: 설치 매뉴얼 및 작동 지침 (16 페이지), 설치 및 운영 매뉴얼 (20 페이지)

페이지 인쇄

6. Check cable pulley for free movement and excessive wear.

Yearly Maintenance

1. Lubricate chains

2. Grease rub blocks and column surface contacting rub blocks

3. Change the hydraulic fluid. It is an important maintenance procedure to keep hydraulic

fluid clean. No hard fast rules though. Operating temperature, type of service,

contamination levels, filtration, and chemical composition of fluid should be considered.

If operating in dusty environment a shorter interval may be required.

Special Maintenance Tasks (performed by a trained maintenance expert only)

 Replacement of hydraulic hoses.

 Replacement of chains and rollers.

 Replacement of cables and sheaves.

 Replacement or rebuilding air and hydraulic cylinders as required.

 Replacement or rebuilding pumps / motors as required.

 Checking of hydraulic cylinder rod and rod end (threads) for deformation or damage.

CAUTION! Relocate or change components may cause problems. Each component in the

system must be compatible. An undersized or restricted line may cause a drop in pressure. All

valve, pump, and hose connections should be sealed and/or capped until prior to use. Air

hoses can be used to clean fittings and other components. However, the air supply must be

filtered and dry to prevent contamination. Most important is cleanliness. Contamination is the

most frequent cause of malfunction or failure of hydraulic equipment.