DURAVIT Inipi 사용 설명서 - 페이지 19
{카테고리_이름} DURAVIT Inipi에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DURAVIT Inipi 19 페이지.
DURAVIT Inipi에 대해서도 마찬가지입니다: 사전 설치 (10 페이지)
페이지 인쇄
Problem
Potential cause
"Heater is off as the max.
Maximum heater op-
permitted operating time
erating time has been
has been exceeded! Heater is
reached.
ready again in 6 hrs."
"Heater is in the resting phase
as the max. permitted operat-
ing time has been exceeded!"
"Heater is off as the maximum
operating time has been ex-
ceeded! Switch off the sauna
and then restart it."
Failure report that cannot be
remedied.
12. Technical Data
12.1 Identification plate
The identification plate is on the back page of the Operating Instructions.
This product conforms to all the appropriate EU guidelines.
DIN EN 60335-2-53
12.2 Sauna
Specifications
Rated voltage
380-415 V
Frequency
50/60 Hz
Max. nominal output
6.6 kW
Protection class
IP X5
Protection against sprayed water (from any direction)
Temperature range
15-40 °C (59-104 °F)
Max. water pressure
(only Inipi Ama)
1.0 MPa (10 bar)
36
see
Solution
page
>
The heater can be
switched on again once
the resting phase has
expired.
>
Disconnect the sauna
from the mains and then
restart it.
>
Disconnect the sauna from
the mains.
>
Make a note of the error
code and call Customer
Service.
Automatic shut-down time
Lighting (except emergency lighting) 12 hours
Sound
12 hours
Heater
Home mode: 6 hours
Hotel mode: 12 hours
12.3 Remote control
Temperature range
15-60 °C (59-140 °F)
Rem. Ctrl. Prot. type
IP X8
Material
Epoxy resin
12.4 Charging station
Rated voltage
100-240 V
Frequency
50/60 Hz
Nominal output
20 W
Material
LG HI-MACS®
12.5 Interior fixtures and fittings
Material
Material
Seating and floor grids
Aspen wood
Walls and ceilings
Birch
Max. load
per lying/sitting level
250 kg (distributed load)
37