AFA Stainless AFUR3018USCOMBO 소유자 매뉴얼 - 페이지 6
{카테고리_이름} AFA Stainless AFUR3018USCOMBO에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFA Stainless AFUR3018USCOMBO 16 페이지.
페이지 인쇄1
Verify cabinet clearance
Verify minimum inside cabinet
clearance is 34" , width 22",
depth 13".
4
CAUTION: Check desired position.
Place the Sink (B-1) upside down on
counter top , inside the original
tracing. Center it on the lines, and
using a Pencil (T-5), trace a line around
the sink. Remove the sink from the
counter top.
2
B-3
Position the Template (B-3) on the
counter top where you wish to install
the sink. Trace around the
template. Carefully cut the counter
hole using a Jig Saw (T-6). Carefully
cut along the inside of the drawn
cut line. Drill 2 holes for the faucet
and soap dispenser.
5
1/2"
(13mm)
Determine location for mounting
brackets; space evenly around the
underside. Mounting holes should
be 1/2" out from the edge of the
sink ledge.
6
3
Turn countertop upside down.
6
1/4"
diameter
(6mm)
Drill mounting holes 1/4" round
by 3/8" deep.
3/8"
(10mm)