Addonics Technologies RAID Tower XIII RT134SDMS 사용자 설명서 - 페이지 6
{카테고리_이름} Addonics Technologies RAID Tower XIII RT134SDMS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies RAID Tower XIII RT134SDMS 10 페이지.
페이지 인쇄BZS Switch (SW1:1):
The BZ switch is used to silence the audible alarm buzzer. The OFF position
permits the audible alarm, and the ON position silences the audible alarm. The BZ
switch has immediate effect.
EZ Switch (SW1:2):
The EZ (spare) switch inhibits spares when ON. When in the OFF position, all
individual drives (not defined as members of an array) are considered spare.
Should a RAID become degraded, when the EZ switch is in the OFF position a
spare drive will be used automatically to rebuild the RAID, if present. EZ mode is
determined when the unit is powered up. Changing the switch will have no effect
until the unit has been re-powered.
RAID Mode Switches M2, M1, M0 (SW1:3 – SW1-5)
The RAID Mode switches define what type of RAID will be initialized when the unit
is powered up while the RAID Mode button is held down. Each type of RAID has
different properties and requirements, as follows:
Dipswitch Position
Raid Mode
JBOD (Individual
drives)
* FACTORY DEFAULT
SETTING
0
1 or 10
3
5
CLONE
LARGE
1 Audible alarm is recommended at all times.
2 EZ mode has no effect in JBOD mode.
3 Disabling EZ for RAID 0 and LARGE is strongly recommended.
www.addonics.com
1
2
BZS
EZ
1
2
OFF
OFF
3
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
Technical Support (M-F 8:30am - 6:00pm PST)
3
4
M2
M1
OFF
OFF
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
Phone: 408-453-6212
Email: www.addonics.com/support/query/
5
M0
OFF
ON
OFF
OFF
OFF
ON
ON