Addonics Technologies RAID Tower XIII RT134SDMS 사용자 설명서 - 페이지 9

{카테고리_이름} Addonics Technologies RAID Tower XIII RT134SDMS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies RAID Tower XIII RT134SDMS 10 페이지.

페이지 인쇄

Notes about Spare Drives

If EZ mode is disabled (SW1:2 ON), all individual drives not configured as array

members will be offered to the host adapter as separate units.

To create an array with one or more spares, set or modify the RAID mode using

fewer than 5 members, while the spares are disconnected from the Port Multiplier.

When EZ mode is enabled, individual drives connected when an array is present

are considered spare.

Spare drives must be equal to or larger in size than the smallest member.

When any type of array is defined, individual units will be considered spare. RAID 0

and LARGE arrays are not fault-tolerant and spare drives will not be useful;

therefore, disabling EZ for these arrays is recommended.

When a spare drive is present and a fault-tolerant RAID (1, 10, 3, or 5) is defined,

EZ mode will automatically rebuild any available spares into the array.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/